Linux IPv6 HOWTO
Prev	Chapter 7. Configuring normal IPv6 routes	Next

7.2. Add an IPv6 route through a gateway

Mostly needed to reach the outside with IPv6 using an IPv6-enabled router on your link.

7.2.1. Using "ip"

Usage:

# /sbin/ip -6 route add <ipv6network>/<prefixlength> via <ipv6address>
╛ [dev <device>]

Example:

# /sbin/ip -6 route add 2000::/3 via 3ffe:ffff:0:f101::1

Usage:

# /sbin/route -A inet6 add <ipv6network>/<prefixlength> gw
╛ <ipv6address> [dev <device>]

A device can be needed, too, if the IPv6 address of the gateway is a link local one.

Following shown example adds a route for all currently global addresses (2000::/3) through gateway 3ffe:ffff:0:f101::1

# /sbin/route -A inet6 add 2000::/3 gw 3ffe:ffff:0:f101::1

Prev	Home	Next
Displaying existing IPv6 routes	Up	Removing an IPv6 route through a gateway