Running tripwire in Database Initialization mode is
typically one of the first steps in setting up
Tripwire for regular operation. This mode creates a baseline
database in the location specified by the
DBFILE
variable in the Tripwire configuration file. The
database is essentially a snapshot of the objects residing on the
system. During later Tripwire integrity checks, this database
serves as the basis for comparison.
When run in Database Initialization mode, tripwire reads the
policy file, generates a database based on its contents, and then
cryptographically signs the resulting database. Options can be entered
on the command line to specify which policy, configuration, and key
files are used to create the database. The filename for the database
can be specified as well. If no options are specified, the default
values from the current configuration file are used.
Integrity Checking Mode
After building the Tripwire database, the next step is typically
to run tripwire in Integrity Checking mode. This mode scans the
system for violations, as specified in the policy file. Using the
policy file rules, Tripwire will compare the state of the current
file system against the initial baseline database. An integrity
checking report is printed to stdout and is saved in the
location specified by the
REPORTFILE
setting in the Tripwire configuration file.
The generated report describes each policy file violation in detail,
depending on whether the specified file system object was added,
deleted, or changed. Each report item lists the properties of the
object as it currently resides on the file system, and, if appropriate,
the old value stored in the database. If there are differences between
the database and the current system, the administrator can either fix
the problem by replacing the current file with the correct file (e.g.,
an intruder replaced /bin/login), or update the database to
reflect the new file (e.g., a fellow system administrator installed a
new version of /usr/local/bin/emacs). The (-I or
--interactive) option launches an editor that allows the
user to update the database quickly. The Database Update mode of
tripwire can also be used.
Database Update Mode
Running tripwire in Database Update mode allows any differences
between the database and the current system to be reconciled. This
will prevent the violation from showing up in future reports. If the
reported change is unexpected and potentially malicious, then the
changed file should be replaced with the original version. If there is
a valid reason for the change, the database must be changed to match
the current files.
In Database Update mode, the items to be changed are specified in a
"ballot box" in the plain text report
that is launched in an editor program.
The entries to
be updated are specified by leaving the "x" next to each policy
violation. After the user exits the editor and provides the correct
local passphrase,
tripwire will update the database.
Options to control this operation include the
(-Z or --secure-mode) and (-a or --accept-all) flags.
Policy Update Mode
Policy update mode is used by tripwire to change or update the
policy file and to synchronize an earlier database with new policy
file information. The filename of the new clear text version of the
policy file is specified on the command line. The new policy file is
compared to the existing version, and the database is updated according
to the new policy rules. Any changes in the database since the last
integrity check will be detected and reported. How these violations
are interpreted depends on the security mode specified with the
(-Z or --secure-mode) option.
In high security mode (the default), Tripwire will print a list of
violations and exit without making changes to the database. In
low security mode, the violations are still
reported, but changes to the database are made automatically.
Because the policy and database files are binary-encoded and
cryptographically signed, the user will be prompted for the site and
local passphrases to change the policy settings. After the database is
successfully updated, the
database and policy files are re-encoded and signed.
Test Mode
Test mode is used to check the operation of the Tripwire email
notification system. When run in this mode, Tripwire will use the
email notification settings specified in the configuration file to send
a test email message. If MAILMETHOD is set to SMTP, the SMTPHOST and
SMTPPORT values will be used to send email. If MAILMETHOD is set to
SENDMAIL, the MAILPROGRAM value will be used. If email notification is
working correctly, the address specified on the command line will
receive the following message:
To: user@domain.com
From: user <user@domain.com>
Subject: Test email message from Tripwire
If you receive this message, email notification
from Tripwire is working correctly.
Test mode only tests email notification for the address specified on
the command-line, and does not check for errors in the syntax used with
the emailto attribute in the policy file.
OPTIONS
Database Initialization mode:
-m i
--init
-v
--verbose
-s
--silent, --quiet
-c cfgfile
--cfgfile cfgfile
-p polfile
--polfile polfile
-d database
--dbfile database
-S sitekey
--site-keyfile sitekey
-L localkey
--local-keyfile localkey
-P passphrase
--local-passphrase passphrase
-e
--no-encryption
-m i, --init
Mode selector.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Use the specified policy file.
-d database, --dbfile database
Write to the specified database file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration and policy
files.
-L localkey, --local-keyfile localkey
Use the specified local key file to write the new database file.
Mutually exclusive with (-e).
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to sign the new database.
Mutually exclusive with (-e).
-e, --no-encryption
Do not sign the database being stored.
The database file will still be compressed and will not be
human-readable.
Mutually exclusive with (-L) and (-P).
Integrity Checking mode:
-m c
--check
-I
--interactive
-v
--verbose
-s
--silent, --quiet
-c cfgfile
--cfgfile cfgfile
-p polfile
--polfile polfile
-d database
--dbfile database
-r report
--twrfile report
-S sitekey
--site-keyfile sitekey
-L localkey
--local-keyfile localkey
-P passphrase
--local-passphrase passphrase
-n
--no-tty-output
-V editor
--visual editor
-E
--signed-report
-i list
--ignore list
-l { level | name }
--severity { level | name }
-R rule
--rule-name rule
-x section
--section section
-M
--email-report
-t { 0|1|2|3|4 }
--email-report-level { 0|1|2|3|4 }
[ object1 [ object2... ]]
-m c, --check
Mode selector.
-I, --interactive
At the end of integrity checking, the resulting report is opened
in an editor where database updates can be easily specified using
the ballot boxes included in the report.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Use the specified policy file.
-d database, --dbfile database
Use the specified database file.
-r report, --twrfile report
Write the specified report file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration
and policy files.
-L localkey, --local-keyfile localkey
Use the specified local key file to read the database
file and, if (-E) is specified, to write the report file.
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to
sign the database when (-I) is used, and to
sign the report when (-E) is used.
Valid only with (-I) or (-E).
-n, --no-tty-output
Suppress the report from being printed at the console.
-V editor, --visual editor
Use the specified editor to edit the update ballot boxes.
Meaningful only with (-I).
-E, --signed-report
Specifies that the Tripwire report will be signed. If
no passphrase is specified on the command line, tripwire
will prompt for the local passphrase.
-i list, --ignore list
Do not compute or compare the properties specified in list. Any
of the letter codes (abcdgimnprstulCHMS) specified in propertymasks can
be excluded.
Use of this option overrides information from the policy file.
The format to be used for list is a double-quoted, comma-delimited list
of properties (e.g. --ignore "p,c,m").
-l { level | name }, --severity { level | name }
Check only policy rules with severity greater than or equal to
the given level. The level may be specified as a number or as a name.
Severity names are defined as follows:
Low 33
Medium 66
High 100
Mutually exclusive with (-R).
-R rule, --rule-name rule
Check only the specified policy rule. Mutually exclusive with
(-l).
-x section, --section section
Only check the rules in the specified section of the policy file. For
Tripwire 2.3.1, FS is the only meaningful
argument for this flag.
-M, --email-report
Specifies that reports be emailed to the recipient(s) designated in the
policy file.
-t level, --email-report-level level
Specifies the detail level of email reports, overriding the
EMAILREPORTLEVEL variable in the configuration file. level must
be a number from 0 to 4.
Valid only with (-M).
[ object1 [ object2... ]]
List of files and directories that should be integrity checked.
Default is all files. If files are specified for checking, the
--severity and --rule-name options will be ignored.
Database Update mode:
-m u
--update
-v
--verbose
-s
--silent, --quiet
-c cfgfile
--cfgfile cfgfile
-p polfile
--polfile polfile
-d database
--dbfile database
-r report
--twrfile report
-S sitekey
--site-keyfile sitekey
-L localkey
--local-keyfile localkey
-P passphrase
--local-passphrase passphrase
-V editor
--visual editor
-a
--accept-all
-Z { low | high }
--secure-mode { low | high }
-m u, --update
Mode selector.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Use the specified policy file.
-d database, --dbfile database
Update the specified database file.
-r report, --twrfile report
Read the specified report file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration
and policy files.
-L localkey, --local-keyfile localkey
Use the specified local key file to read the database
file and report file, and to re-write the database file.
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to
sign the database.
-V editor, --visual editor
Use the specified editor to edit the update ballot boxes. Mutually
exclusive with (-a).
-a, --accept-all
Specifies that all the entries in the report file are updated
without prompting. Mutually exclusive with (-V).
-Z { low | high }, --secure-mode { low | high }
Specifies the security level, which affects how certain conditions are
handled when inconsistent information is found between the report file
and the current database:
High: In high security mode, if a file does not match the
properties in the report file, Tripwire reports the differences as
warnings, and exits without changing the database.
Low: In low security mode, inconsistencies
are reported as warnings,
but the changes are still made to the database.
Policy Update mode:
-m p
--update-policy
-v
--verbose
-s
--silent, --quiet
-c cfgfile
--cfgfile cfgfile
-p polfile
--polfile polfile
-d database
--dbfile database
-S sitekey
--site-keyfile sitekey
-L localkey
--local-keyfile localkey
-P passphrase
--local-passphrase passphrase
-Q passphrase
--site-passphrase passphrase
-Z { low | high }
--secure-mode { low | high }
policyfile.txt
-m p, --update-policy
Mode selector.
-v, --verbose
Verbose output mode. Mutually exclusive with (-s).
-s, --silent, --quiet
Silent output mode. Mutually exclusive with (-v).
-c cfgfile, --cfgfile cfgfile
Use the specified configuration file.
-p polfile, --polfile polfile
Write the specified policy file.
-d database, --dbfile database
Use the specified database file.
-S sitekey, --site-keyfile sitekey
Use the specified site key file to read the configuration
file, and read and write the policy file.
-L localkey, --local-keyfile localkey
Use the specified local key file to read and write the database
file.
-P passphrase, --local-passphrase passphrase
Specifies passphrase to be used with local key to
sign the database.
-Q passphrase, --site-passphrase passphrase
Specifies passphrase to be used with site key to sign
the new policy file.
-Z { low | high }, --secure-mode { low | high }
Specifies the security level, which affects how certain conditions are
handled when the existing filesystem does not match the database
information. Since the database produced at the end of a policy update
becomes the baseline for future integrity checks, this
consistency-checking ensures that no substantive filesystem changes
have occurred since the last integrity check.
High: In high security mode, if a file on the filesystem does
not match the properties in the database file, Tripwire reports the
differences as warnings, and exits without changing the database or the
policy file.
Low: In low security mode, inconsistencies are reported as
warnings, but the changes are still made to the database and policy
file.
policyfile.txt
Specifies the text policy file that will become the new policy file.
Use the specified email address. This parameter must
be supplied when test mode is used. Only one address
may be specified.
VERSION INFORMATION
This man page describes
tripwire
version 2.3.1
AUTHORS
Tripwire, Inc.
COPYING PERMISSIONS
Permission is granted to make and distribute verbatim copies of this man page provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this man page under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this man page into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by Tripwire, Inc.
Copyright 2000 Tripwire, Inc. Tripwire is a registered trademark of Tripwire, Inc. in the United States and other countries. All rights reserved.
