Приведу сразу dmesg:
viking# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon May 10 11:55:23 MSD 2004
root@viking.print.net:/usr/obj/usr/src/sys/VIKING.01
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0813000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0813294.
ACPI APIC Table: <INTEL S875PWP3>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536018944 (511 MB)
avail memory = 510935040 (487 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL S875PWP3> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f3d30
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu1: Failed to attach throttling P_CNT
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xfc000000-0xfc7fffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xac00-0xac1f mem 0xfc9e0000-0xfc9fffff irq 18 at device 1.0 on pci2
em0: Speed:N/A Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 6.0 (no driver attached)
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xbc00-0xbc3f mem 0xfeafe000-0xfeafefff irq 20 at device 8.0 on pci3
fxp0: Ethernet address 00:0c:f1:ac:9b:28
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xec00 on atapci1
ata2: [MPSAFE]
ata3: at 0xe400 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad0 dp=0xc4903860
ad0: 19092MB <ST320014A> [38792/16/63] at ata0-master UDMA100
acd0: CDRW <TOSHIBA ODD-DVD SDR1412T> at ata0-slave PIO4
GEOM: create disk ad2 dp=0xc4817e60
ad2: 114473MB <ST3120022A> [232581/16/63] at ata1-master UDMA100
GEOM: create disk ad3 dp=0xc4817660
ad3: 114473MB <ST3120022A> [232581/16/63] at ata1-slave UDMA100
GEOM: create disk ad6 dp=0xc4817b60
ad6: 239372MB <Maxtor 7Y250M0> [486344/16/63] at ata3-master UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
Мать s875wp1-e.
Плюс к этому есть еще винт sata(ad4) от Maxtor такой же как и ad6.
сложность в том что через некоторое время при обращении к нему машина стала вешаться намертво.
в логах:
kernel: ad4: TIMEOUT - READ_DMA retrying (2 retries left) LBA=17035743
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=114511199
kernel: ad2: WARNING - READ_DMA interrupt was seen but timeout fired LBA=113044575
kernel: ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=2363755
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=114511199
kernel: ad2: WARNING - READ_DMA interrupt was seen but timeout fired LBA=113044575
kernel: ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=2363755
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=114511327
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but taskqueue stalled LBA=114511199
kernel: ad2: WARNING - READ_DMA interrupt was seen but taskqueue stalled LBA=113044575
kernel: ad0: WARNING - READ_DMA interrupt was seen but taskqueue stalled LBA=2363755
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=114511327
kernel: ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=262559
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=114034759
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but taskqueue stalled LBA=114511327
kernel: ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=262559
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=114034759
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=191
kernel: ad0: WARNING - READ_DMA interrupt was seen but taskqueue stalled LBA=262559
kernel: ad6: WARNING - WRITE_DMA interrupt was seen but taskqueue stalled LBA=114034759
kernel: GEOM: destroy disk ad4 dp=0xc4817b60
kernel: ad4: WARNING - removed from configuration
Это вот при последней попытке вытащить с него инфу...
Только ad6 был wd2500jd пробовал потехоньку на него сбэкапиться.
Но в принципе проблемы такого характера появляются при наличии первого макстора(второй макстор пока работает)
Очень нужна помощ!!!
Навреняка сказал путано... спрашивайте если что... щас голова как барабан. домой спать.
Вариант для распечатки
OpenNET: Виртуальная конференция (Public)
(ok) on
31-Май-04, 22:35 (MSK)
