"CiSCO 1841 уменьшается скорость соединения с интернетом" | +/– |
Сообщение от Евгений (??) on 11-Май-10, 11:32 |
соединение с интернетом 2MBit. подключал ноутбук напрямую. как только подключаюсь после CiSCO 1841 скорость существенно падает и не превышает 1 - 1,3 MBit-а. Вот мой конфиг? --------------------------------------------------------------------------------- Building configuration... Current configuration : 2635 bytes ******** version 12.4 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! ********* ! boot-start-marker boot-end-marker ! **************************************** ! no aaa new-model clock timezone ****** no ip gratuitous-arps ip cef ! ! ! ! no ip bootp server ip name-server *********** ppp limit ccp 2 multilink bundle-name authenticated vpdn enable ! vpdn-group 1 ! vpdn-group ppoe ! ! ! username **************************** archive log config hidekeys ! ! ! ! ! interface FastEthernet0/0 description $ETH-WAN$ no ip address speed auto half-duplex pppoe enable pppoe-client dial-pool-number 1 no mop enabled ! interface FastEthernet0/1 description $ETH-LAN$ ip address 172.16.11.10 255.255.0.0 secondary ip address 192.168.0.1 255.255.255.0 ip broadcast-address 192.168.0.255 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1412 speed auto half-duplex no mop enabled ! interface Dialer1 ip address negotiated ip mtu 1452 ip nat outside ip virtual-reassembly max-reassemblies 24 encapsulation ppp dialer pool 1 dialer-group 2 no cdp enable ppp authentication chap callin ppp chap hostname ******************** ppp chap password ********************* ppp pap sent-username ***************** password ****************** ! no ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 Dialer1 ! ! ip http server ip http access-class 23 ip http authentication local ip dns server ip nat inside source list 1 interface Dialer1 overload ip nat inside source static tcp 192.168.0.2 1000 interface Dialer1 10000 ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 21 ip nat inside source static tcp 192.168.0.2 22 interface Dialer1 22 ip nat inside source static tcp 172.16.11.2 80 interface Dialer1 3267 ! access-list 1 remark INSIDE_IF=FastEthernet0/1 access-list 1 remark SDM_ACL Category=2 access-list 1 permit 192.168.0.0 0.0.0.255 access-list 23 permit 192.0.0.0 0.255.255.255 access-list 110 permit tcp any host 192.168.0.2 eq ftp access-list 110 permit tcp any host 192.168.0.2 eq ftp-data access-list 110 permit tcp any eq ftp-data any gt 1024 dialer-list 1 protocol ip permit dialer-list 2 protocol ip permit no cdp run ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 password******************* login ! scheduler allocate 20000 1000 ntp clock-period 17178444 ntp server 207.46.197.32 ntp server 207.46.232.182 end
|
Высказать мнение | Ответить | Правка | Cообщить модератору |